Rechargeable Heat Cutter

Hapyson's Rechargeable Heat Cutter is a practical accessory that allows you to cut and define nylon, fluorocarbon and braid. It allows you to cut very easily and very quickly, it's also rechargeable with a micro USB cable (included) so that it can be used repeatedly. It has two levels of temperature regulation based on the material (nylon/fluorocarbon or braided) and thickness. A practical LED indicates the chosen mode. The IPX4 structure resists water drops.

- Temperature: Strong about 420°C, weak about 270°C;
- Can be used with: Nylon/Fluorocarbon (from 0.165mm to 1.050mm) and PE (from size 0.3 to 12);
- Battery life: About 50 times (with use every time for 5 seconds at high temperature);
- Charging time: About 2.5 hours;
- Recharge: Micro USB;
- Anti-drip: IPX4.

How to use?
1) Click once and hold to cut the braid/PE line;
2) Double click and hold to cut nylon and fluorocarbon;
3) To finalize the nylon/fluorcarbon (ideal after making a knot), double-click and hold down, then place the line repeatedly in the appropriate round space.